Table of Contents
Advertisement
Disassembly
Removing the Camera Assembly
G
26
1.
Remove the battery door, battery, rear housing, antenna, and daughter board
as described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Insert the flat end of the disassembly tool under the edge of the camera
connector and rotate the tool to unseat the camera connector from the socket
(see Figure 13),
Camera
connector
Figure 13. Removing the Camera Assembly Connector
May 15, 2006
Q CDMA
060215a
6809495A97-O
Advertisement
Table of Contents
