Table of Contents
Advertisement
Disassembly
Removing and Replacing the Antenna
24
1.
Remove the battery cover, battery and rear housing as described in the
procedures.
2.
Insert one prong of the metal tweezers into the access slot to release the snap
securing the antenna carrier to the main PC board.
3.
Once the snap is released, lift the antenna carrier straight up and away from
the phone. Avoid damage to the pogo pins (see Figure 11).
Figure 11. Removing the Antenna Carrier
4.
To replace, align the antenna carrier to the phone.
5.
Press the antenna carrier onto the main board until the snaps engage.
6.
Replace the rear housing, battery, and battery cover as described in the
procedures.
May 15, 2006
Access slot
Snap
Q CDMA
Antenna carrier
060200o
6809495A97-O
Advertisement
Table of Contents
