Tools And Test Equipment - Motorola CDMA 800/1900 MHz Service Manual

Level 2 Service Manual

Tools and Test Equipment

Table 1. General Test Equipment and Tools
Motorola Part Number
RSX4043-A
—
See Table 7
0180386A82
19501980 (AMS)
0-00-00-40849 (AMS)
0-00-00-30005 (AMS)
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or by fax (847) 576-3023.
2. Not available from Motorola. To order, contact: AMS Software & Elektronik GmbH, c/o Holger Grube, Lise-Meitner-
Straße 9 D-24941 Flensburg Tel.: +49-461-90398-0 Fax: +49-461-90398-50
6809495A97-O
2
Q CDMA
6809495A97-O
The following table lists tools and test equipment recommended for disassembly
and reassembly of Q telephones. Use either the listed items or equivalents.
1
Torque Driver
Torque Driver Bit T-6, Apex 440-6 Torx or
equivalent. Torque setting is 1.25 in-lbs
or 14 Ncm
Rapid Charger
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band)
2
Generic Press Tool
2
keyboard adapter
Disassembly tool, plastic with flat and
2
pointed ends (manual opening tool)
Description
May 15, 2006
Tools and Test Equipment
Application
Used to remove and replace screws
Used with torque driver
Used to charge battery and power
phone
Provides protection from damage to
device caused by electrostatic discharge
(ESD)
Used to install keyboard
Used during assembly/disassembly of
phone
17