Table of Contents
Advertisement
Level 2 Service Manual
Removing the Motor/Vibrator Assembly
6809495A97-O
1.
Remove the battery door, battery, and rear housing, as described in the
procedures.
2.
Use the plastic tweezers to lift the motor/vibrator assembly out of the rear
housing (see Figure 10).
Plastic tweezers
Rear housing assembly
Figure 10. Removing the Motor/Vibrator Assembly
3.
To replace, align the motor/vibrator assembly to its place in the rear housing
assembly.
4.
Carefully press the motor/vibrator assembly into position in the rear housing.
Ensure the motor/vibrator shaft turns freely.
5.
Replace the rear housing, battery, and battery door as described in the
procedures.
Motor/vibrator assembly
May 15, 2006
Disassembly
060346o
23
Advertisement
Table of Contents
