Operating Mode; Operation - Varytec Laser Moonstar MK II User Manual

8.1. Operating Mode

Attention!
When laser is powered on, LCD monitor on rear panel shows the current operating standalone mode or DMX
address of DMX mode. With help of LCD control panel, is very easy to set and change the operating mode of
laser. After every resetting and saved, the new mode information will be shown on LCD monitor at next power on.
Mode Option, to choose the operating mode of laser.
Confirmation, to confirm the laser to show the present mode at the next operation.
UP/DOWN, to change operating mode, parameter or DMX address.

8.2. OPERATION

Attention!
Once after every power on laser, the VERSION and MANUFACTURE
INFORMATION will be shown in LCD monitor of rear panel.
In preprogrammed standalone MUSIC SHOW mode, the laser beam will be
blank-out in 3 seconds without AUDIO/MIC activated signal.
15 / 22