Automatic Mode; Sound To Light Mode; Set Up Your Fixed Colour; Master Slave Mode - Varytec LED PAD 147 User Manual

3.2. Automatic mode.

To set up the automatic mode, do as follows:
- Set the dips 9 and 10 to ON
- Set the dip 8 to OFF
- With the dips 1, 2, 3 you can adjust the speed
- With the dips 4, 5, 6 you can choose the automaticprogram.

3.3. Sound to Light mode

to choose the sound to light mode, go on as you read here:
- Set the dips 8 and 10 to ON
- Set the dip 9 to OFF
- With the dips 4, 5, 6 you can choose the soundprogram

3.4. Set up your fixed colour

To set up own fixed colours go on as follows:
- Set the dip 10 to ON
- With the dips 1 and 2 you can adjust the dimmer.
- With the dips 3 and 4 you can adjust the strobe
- With the dips 5, 6, 7 you can choose red, green and blue

3.5. Master Slave mode

If you want to set up a master slave mode, first you have to connect all the fixtures.
For the connection of master fixture and slave fixture, please use a standard dmx 3 pole XLR 110
Ohms cable. Connect the male connector to the master and the female connector to the slave
fixture. Go on like this until all the fixtures you want to be connected, are connected. The
possible settings for the master are the Automatic mode or the own colour mode. All the other
fixtures (slave) you have to set up as follows:
Set all dips to OFF
-
6 / 8