Before Operation; Unpacking Instructions; What Is Included; Power Supply - Varytec Laser Moonstar MK II User Manual

Table of Contents

Advertisement

-
Please use the original packaging if the device is to be transported.
-
Please consider that unauthorized modifications on the device are forbidden due to safety
reasons!
CAUTION! Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation
CAUTION! If this device will be operated in any way different to the one described in this manual, the
product may suffer damages and the warranty word.

5. BEFORE OPERATION

5.1. Unpacking Instructions

CAUTION!

5.2. What is included

The carton or flight case contain following items
NAME
Laser Light
KEYs (for key switch)
Power Cord
USER MANUAL

5.3. Power Supply

To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture of
refer to the fixture's specifications chart. A fixture's listed current rating is its average current draw under normal
conditions. All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable
resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. Before
applying power to a fixture, check that the source voltage matches the fixture's requirement.
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be
required they must be carried out with the following configuration.
Immediately upon receiving a fixture, carefully unpack the carton, check the contents
to ensure that all parts are present and have been received in good condition. Notify
the shipper immediately and retain packing material for inspection if any parts appear
damage from shipping or the package itself shows signs of mishandling. Save the
package and all packing materials. In the event that a fixture must be returned to the
factory, it is important that the fixture be returned in the original factory box and
packing.
QTY
1 PCS
2 PCS
1 PCS
1 PCS
9 / 22

Advertisement

Table of Contents
loading

Table of Contents