Stand Alone Preprogram Laser Show; Sound Activated Sensitivity Setting - Varytec Laser Moonstar MK II User Manual

8.3. Stand Alone Preprogram Laser Show

Press FUNC to enter MODE OPTION.
Till to LED panel shows either one of AUF, AUS, SOU,RDN
Press FUNC to select your favorite Stand Alone mode as
above.
Press ENTER to confirm the setting.
The laser is working in stand alone. Each time when you turn on
your laser, you will have this confirmed laser show.
In the MODE OPTION setting, the stand alone laser show that you are going to choose is flashing. Press FUNC
to change stand alone laser show, you will have 3 different stand alone preprogrammed laser show. Their
DISPLAY and EFFECT are listed below:

8.4. Sound Activated Sensitivity Setting

In the MODE setting, press ENTER to confirm Sou (Sound Activated Mode), the setting manual goes
into Sound Activated Sensitivity Setting. LED display S 0 ~ S 9. Press UP / DOWN to take your
favorite Sensitivity Level. S 0 is no sound activated, from S 1 to S 9, the sensitivity level is going more
sensitive. Press ENTER to confirm the setting.
16 / 22