Gear Removal (When Required); Oil Pump Removal; Front Plate Removal - Mitsubishi S3L Service Manual

DISASSEMBLY
t
Figure 49 Removing fuel injection pump camshaft
t
Figure 50 Removing oil pump
t
Figure 51 Removing front plate
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
Timing Gears and Flywheel
2. Tap the rear end of the camshaft with a copper bar
to push it out of the front side of the cylinder block.

15.12 Gear removal (when required)

To remove the gears from the camshaft and fuel
injection pump camshaft, use an arbor press.

15.13 Oil pump removal

Remove the bolts that hold the oil pump to the cylinder
block and remove the pump.

15.14 Front plate removal

Remove four bolts that hold the front plate in position.
Tap the plate lightly with a plastic hammer to separate
the gasket.
ENGLISH 51 / 195