Table of Contents
Advertisement
S
S
UPER
ERVER 8046B-6RF/8046B-TRF User's Manual
Removing the Power Supply
1.
First unplug the AC power cord that corresponds to the failed power supply
unit. The power cords are oriented the same as the modules are (the left/top
power cord corresponds to the left/top power module).
2.
Depress the locking tab on the power supply unit and pull the unit straight out
by the handle. See Figure 6-8.
Installing a New Power Supply
1.
Replace the failed module with another power supply module. It must be the
exact same. Refer to Appendix B for the correct part number.
2.
Push the new power supply unit into the power bay until you hear a click.
3.
Plug the AC power cord back in.
Figure 6-8. Removing a Power Supply Module
6-10
Advertisement
Table of Contents
