Table of Contents
Advertisement
S
S
UPER
ERVER 8046B-6RF/8046B-TRF User's Manual
Figure 2-2. Identifying the Inner Rails and Chassis Handles
Chassis Handle
Screw
1
1
Chassis Rail
Screw
4.
Locate the inner rails (2) and screws (12) in the shipping package.
5.
Align the inner rails against the chassis, as shown. Confi rm that the rails are
fl ushed against the edge of the chassis.
6.
Tighten the screws. Do not over tighten.
7.
Repeat steps 5 and 6 with the other inner rail.
Installing the Outer Rails to the Rack
1.
Attach the front and rear short brackets to the outside of the long bracket.
Both bracket ends must face the same direction.
2.
Adjust both the brackets to the proper distance so that the rail fi ts snugly into
the rack.
3.
Secure the front side of the outer rail with two M5 screws and the rear side
of the outer rail with three M5 screws. Note: The outer rail is adjustable from
approximately 26" to 38.25".
4.
Repeat steps 1-3 for the left outer rail.
1
1
2-6
Inner Rails
1
1
Chassis Handle
Advertisement
Table of Contents
