Adjusting The Picture; Audio Adjustments; Displaying The "Audio" Setting Screen; Using Fader/Balance Adjustment - Pioneer MVH-AV275BT Owner's Manual

System settings
 When the cursor for off time setting is placed on
the left end and the cursor for on time setting is
placed on the right end, the dimmer available
time is 0 hours.
 When the cursor for on time setting is placed on
the left end and the cursor for off time setting is
placed on the right end, the dimmer available
time is 24 hours.
 The time display of the dimmer duration adjusting
bar is depending on the clock display setting.
 Setting the time and date on page 26

Adjusting the picture

You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the parking brake. Refer
to Important Information for the User (a separate manual).
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.
●
Brightness:
Adjusts the black intensity. (–24 to +24)
●
Contrast:
Adjusts the contrast. (–24 to +24)
●
Color:
Adjusts the color saturation. (–24 to +24)
●
Hue:
Adjusts the tone of color (which color is emphasized, red or
green). (–24 to +24)
●
Dimmer:
Adjusts the brightness of the display. (+1 to +48)
 With some pictures, you cannot adjust Hue and
Color.
 When you touch [Rear View], the mode changes
to the picture adjustment for rear view. By touch-
ing [Source], you can return to the picture adjust-
ment for AV source.
5 Touch , , , to adjust.
 The adjustments of "Brightness", "Contrast"
and "Dimmer" are stored separately when your
vehicle's headlights are off (daytime) and on
(nighttime).
 "Brightness" and "Contrast" are switched auto-
matically depending on whether the vehicle's
headlights are on or off.
 "Dimmer" can be changed the setting or the time
to switch it to on or off.
 Setting the time and date on page 26
 The setting contents can be memorized
separately.

Audio adjustments

Displaying the "Audio" setting
screen
1 Press .
2 Touch , and then .
The "Audio" setting screen appears.

Using fader/balance adjustment

p This function is available when "Rear Speaker Output" is
set to "Full", and "Preout" is set to "Rear".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
2 Touch [Fader/Balance].
3 Touch or to adjust the front/rear speaker
balance.
4 Touch or to adjust the left/right speaker
balance.
p "Front15" to "Rear15" is displayed as the front/rear speaker
balance moves from the front to rear.
p "Left15" to "Right15" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "F/R 0 L/R 0".
 You can also set the fader/balance by touching
the point on the displayed table.

Using balance adjustment

p This function is available when "Rear Speaker Output" and
"Preout" are set to "Subwoofer Settings".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 23
2 Touch [Balance].
3 Touch or to adjust the left/right speaker
balance.
p "Left15" to "Right15" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "L/R 0".
 You can also set the balance by touching the point
on the displayed table.
23