System Settings; Displaying The "System" Setting Screen; Setting The Steering Wheel Control; Activating The Bluetooth Audio Source - Pioneer MVH-AV275BT Owner's Manual

System settings

Displaying the "System" setting
screen
1 Press .
2 Touch , and then .
The "System" setting screen appears.
Setting the steering wheel
control
You can set the steering wheel control on the display via a wired
remote cable.
 Power cord on page 28
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p This setting is available when turn all the sources off.
This setting is required for using the steering wheel remote
control function.
p You can set a function key to more than one steering wheel
key.
p You can set only one function key to a steering wheel key.
p If you make a mistake after connecting this product with the
supplied wired remote cable, please reset it.
p If this function does not work correctly, contact your dealer
or an authorized Pioneer Service Station.
p When you start to set, all the default key settings is automati-
cally cleared.
For steering wheel control adapter
for Pioneer users
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Steering Wheel Control].
3 Touch [With Adapter].
4 Touch [OK].
Registering function to each key
manually
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Steering Wheel Control].
3 Touch [No Adapter].
4 Touch the item to select the brand of your
vehicle.
5 Touch the item to set.
Follow the on-screen instructions to register the function setting.
 If you touch [Clear], all the settings is cleared.
Activating the Bluetooth audio
source
AV275BT
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On"
(default) or "Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Ever Scroll] to switch "On" or "Off"
(default).

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC6) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
p When the shift lever is aligned to the REVERSE (R) position
immediately after the system of this product is started up,
only the camera image will be displayed and the parking
assist guidelines will not be displayed.
Camera for Rear View mode
Rear View can be displayed at all times. Please note that with
this setting, the camera image is not resized to fit, and that a
portion of what is seen by the camera is not viewable.
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
Setting rear view camera activation
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Camera Settings].
3 Touch [Back Camera Input] to switch "On" or
"Off" (default).
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
 Setting rear view camera activation on page 21
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Camera Settings].
3 Touch [Camera Polarity].
●
Battery (default):
The polarity of the connected lead is positive.
●
Ground:
The polarity of the connected lead is negative.
Setting the camera for Rear
View mode
To display "Rear View" at all times, "Rear View" needs to be
set to "On".
1 Press .
21