Setting The Dimmer; Adjusting The Picture; Displaying The Firmware Version; Displaying The Open Source Licenses - Pioneer AVH-X390BS Owner's Manual

System settings

Setting the dimmer

Setting the dimmer trigger
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.

Auto (default):
Switches the dimmer to on or off automatically according to
your vehicle's headlight turning on or off.
 Manual:
Switches the dimmer to on or off manually.

Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day
or night
p You can use this function when "Dimmer Trigger" is set to
"Manual".
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following
items.

Day (default):
Turns the dimmer manually to off.
 Night:
Turns the dimmer manually to on.
Setting the dimmer duration
optional
You can adjust the time that the dimmer is turned on or off.
p You can use this function when "Dimmer Trigger" is set to
"Time".
40
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration].
The "Duration Setting" screen appears.
4 Drag the cursors to set the dimmer duration.
 You can also set the dimmer duration touching
or .
or moves the cursor back-
Each touch of
ward or forward in the 15 minute width.
p The default setting is 18:00-6:00 (6:00 PM-6:00 AM).
p When the cursors are placed on the same point, the dimmer
available time is 0 hours.
p When the cursor for off time setting is placed on the left end
and the cursor for on time setting is placed on the right end,
the dimmer available time is 0 hours.
p When the cursor for on time setting is placed on the left end
and the cursor for off time setting is placed on the right end,
the dimmer available time is 24 hours.
p The time display of the dimmer duration adjusting bar is
depending on the clock display setting.
 Refer to Setting the time and date on page 48

Adjusting the picture

You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the parking brake.
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.

Brightness:
Adjusts the black intensity. (–24 to +24)
 Contrast:
Adjusts the contrast. (–24 to +24)

Color:
Adjusts the color saturation. (–24 to +24)
 Hue:
Adjusts the tone of color (which color is emphasized, red or
green). (–24 to +24)

Dimmer:
Adjusts the brightness of the display. (+1 to +48)

Temperature:
Adjusts the color temperature, resulting in a better white
balance. (–3 to +3)
p With some pictures, you cannot adjust Hue and Color.
 When you touch [Rear View] or [2nd Camera],
the mode changes to the selected camera mode.
By touching [Source], [Navi] or [Apps], you can
return to the selected mode.
5 Touch , , , to adjust.
p The adjustments of "Brightness", "Contrast" and "Dimmer"
are stored separately when your vehicle's headlights are off
(daytime) and on (nighttime).
p "Brightness" and "Contrast" are switched automatically
depending on whether the vehicle's headlights are on or off.
p "Dimmer" can be changed the setting or the time to switch
it to on or off.
 Refer to Setting the dimmer on page 40
p The picture adjustment may not be available with some rear
view cameras.
p The setting contents can be memorized separately.
Displaying the firmware
version
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [System Information].
3 Touch [Firmware Information].
The "Firmware Information" screen appears.
Displaying the open source
licenses
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [System Information].