Hilti DX 460 SM Operating Instructions Manual page 9

Fastening guidelines
For more specific information, refer to the Product Technical Guide, which is available from your local Hilti orga-
nization or if necessary, your national technical regulations.
Note: The MX SM magazine and associated fasteners are only suitable for fastenings on steel!
B
Check nail head-standoff (use the supplied nail head standoff templates)
X-EDNK 22 THQ 12M (HSN 22)
X-EDN 19 THQ 12M (HSN 19)
X-EDNK 22-THQ12M
Note: Use a Hilti nail head stand-off gauge.
Piston
Article no.
373303
Accessory
Article no.
373330
370831
Cleaning set
Hilti spray, Ramrod, Flat brush, Round brush big, Round brush small, Scraper, Cleaning cloth
Printed: 08.07.2013 | Doc-Nr: PUB / 5129667 / 000 / 01
A
C
X-EDN 19-THQ12M
Ordering designation
X-460-PSM
Ordering designation
X-460-B
X-SH 460
Steel:
A = min. edge distance = 10 mm (
B = min. spacing = 20 mm (
C = min. base material thickness = 3.2 mm (
X-ZF 22 THS 12M (FDN 22)
Fastening inspection
Application description
Standard piston for HSN and FDN pins.
Application description
Buffer; does not fit the DX A41 SM tool
Standup handle for DX 460 SM
")
3 /
8
")
3 /
4
")
1 /
8
en
5