6 Utilisation with the control panel IniControl 2
6
Utilisation with the control panel IniControl 2
6.1
Use of the control panel
Fig.18
Accessing the menus
MW-5000009-3
Fig.19
Navigating to choose the menu – To
the right
Fig.20
Navigating to choose the menu – To
the left
20
EFU
6.1.1 Browsing in the menus
Note
The first time a key is pressed, the backlit screen is switched on.
The name of the PCB is displayed: check that it is actually the
PCB on which the setting must be made.
1. To access the menu level, press the two keys on the right simultane
ously.
2. To go back to the main display, press the
3.
MW-5000018-3
To select the desired menu, press the
the desired menu flashes.
The
The
Tab.10 Menus available
MW-3000248-2
key is used to move to the right.
key is used to move to the left.
Information menu
User menu
Installer menu
Forcing Manual mode
Failure menu
Hour run meters sub-menu
Timer Program sub-menu
Clock sub-menu
The icon is displayed only if an optional PCB has
been installed
key.
or
key until the icon for
7642066 - v01 - 29092015