Ram Module - Panasonic Toughbook CF-M34 Series Reference Manual

RAM Module

RAM Module
2
2
Hooks
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unus-
able or the computer may not operate properly.
RAM module specifications
144 pins, SO-DIMM, 3.3 V, SDRAM, PC100 Compliant
CAUTION
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components of
the computer. Therefore, when installing or removing a RAM module, handle the
module with extreme care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Remove the battery pack
3
Remove the cover
Remove the ten screws with a screwdriver, and remove the bottom
cover as shown in the illustration.
4
Installing the RAM module
2
Removing the RAM module
Open the left and right hooks.
Gently remove the RAM module from the slot.
2
5
Put the cover back into place
(
(
Slide in the module at an angle.
Snap the module into place by pushing down on it.
Only a RAM card designed for
PC100 can be added
(Max 128 MB).
"Starting Up/Shutting Down")
page 20)
24