BodyCraft F603 Assembly Instructions Manual
Weight bench
Hide thumbs
Also See for F603:
- Assemble manual (8 pages) ,
- Assembly manual (7 pages) ,
- Assembly instructions manual (28 pages)
Subscribe to Our Youtube Channel
Related Manuals for BodyCraft F603
Summary of Contents for BodyCraft F603
- Page 1 Assembly Instructions max. 362 kg ~ 30 Min. 28 kg L 127 | W 73 | H 41 FSBCF603.01.01 Art. No. BC-F603 Weight Bench F603...
- Page 2 F603...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions Transportation Wheels TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List... - Page 4 F603...
- Page 5 BodyCraft weight stations, for example, off er a very wide range of exercise possibilities. This ranges from traditional strength training such as bench presses to rehabilitation exercises and workouts for complex sports such as golf, tennis or badminton.
- Page 6 (person with legal responsibility). Class H (home use): use at home. These stationary training devices are intended for the use in private homes where access to the training device is regulated by the owner (person with legal responsibility). F603...
- Page 7 Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions. The following safety instructions may appear in this manual: ATTENTION This notice indicates potentially hazardous situations which, if not avoided, may result in property damage.
-
Page 8: General Information
125 cm x 53 cm x 22 cm Set-up dimensions (L x W x H) approx.: 127 cm x 73 cm x 41 cm Maximum load (load + user weight): 362 kg Adjustment range of back rest: 6 positions from 0° to 85° Use class: F603... -
Page 9: Personal Safety
Personal Safety ⚠ DANGER Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly aff ected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 10: Set-Up Place
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness. For Class S equipment, the exercise equipment may only be used in areas where access, supervision and control are specifi cally regulated by the owner. F603... -
Page 11: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suff ocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. -
Page 12: Scope Of Delivery
In the event of complaints, the contractual partner must be contacted directly. ⚠ CAUTION If parts of the scope of delivery are missing or damaged, the assembly must not be carried out. F603... -
Page 13: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fi t properly. Tighten the screws using the tool only when you are instructed to do so. - Page 14 Attach two hex bolts (19), four washers (23), two sleeves (10) and two nylon nuts (25) to the according holes in the back support frame (3) as shown. Please note that these bolts and sleeves do not attach to the base frame (2). Install and tighten the longer pop pin (16). F603...
- Page 15 Step 3: Assembly of the Pads Attach the back pad (6) to the back adj. slider (4) using four hex threaded bolts (20) and four washers (23). Slide the back adj. slider (4) onto the back support frame (3) and lock it into place at the desired height using the spring knob (15).
-
Page 16: Storage And Transport
After that, you easily can move the equipment to a new position. For long transport distances the equipment should be disassembled and safely packed. Select the new location by following the instructions in the section 1.3 of this manual. F603... -
Page 17: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. ⚠ CAUTION Damaged or worn components may aff ect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 18: Maintenance And Inspection Calendar
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment. F603... -
Page 19: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more effi cient and pleasant, we recommend that you add suiting accessories to your fi tness equipment. For training equipment like smith machines, weight benches or racks this could for example be a fl oor mat, which makes your fi tness equipment stand more securely and also protects the fl oor from sweat but it could be also additional weights, handles, foot straps for leg exercises or triceps ropes. -
Page 20: Ordering Spare Parts
NOTICE The serial number of your equipment is unique. It’s located on a white sticker. Enter the serial number in the appropriate fi eld. Serial number: Brand / Category: BodyCraft / weight bench Model Name: F603 Article Number: BC-F603 F603... -
Page 21: Parts List
Parts List Name Qty. Rear frame Base frame Back support frame Back adj. Slider Handle bar Back pad Seat pad Sheet nonslip Hand grip Sleeve Wheel Rect. Plastic bushing 45x75mm end rect. Plug Steel bushing Spring knob Longer pop pin 1/2"... -
Page 22: Exploded Drawing
Exploded Drawing F603... -
Page 23: Warranty
WARRANTY Products from BodyCraft® are subject to strict quality control. However, if a fi tness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. - Page 24 For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy. F603...
-
Page 25: Contact
CONTACT TECHNIK TEKNIK OG SERVICE CUSTOMER SUPPORT �� �� �� +49 4621 4210-900 80 90 16 50 00800 2020 2772 +494621 4210 944 +49 4621 4210-945 �� +49 4621 4210-698 �� �� info@fi tshop.dk info@fi tshop.co.uk �� technik@fi tshop.de �� ��... - Page 26 Visit us also on our social media platforms or our blog! F603...
- Page 28 Weight Bench F603...
Need help?
Do you have a question about the F603 and is the answer not in the manual?
Questions and answers