AT&T SL82218 User Manual page 53

Answering system
Answering system setup
Base ringer
You can set the volume to high or low, or turn
the base ringer off. Unless you change it, the
telephone base ringer volume is set to low.
To change the setting:
1. Press SETUP twice. The system will announce
"Base ringer," followed by the current setting,
and then "To change the setting, press SKIP or
REPEAT; to continue setup, press SETUP."
2. Press SKIP or
low or high.
3. Press SETUP to save your selection and move
to the next menu option.
-OR-
Press
PLAY/
and exit the menu.
Remote access code
To access your answering system remotely from
any touch-tone phone, you need to enter a two-
digit number (10-99). Unless you change it, the
remote access code is 19.
To change the remote access code:
1. Press SETUP three times. The system will
announce "Remote access code," followed by
the current setting, and then "To change the
setting press SKIP or REPEAT; to continue
setup, press SETUP."
2. Press SKIP or
access code number by one. Press and hold
SKIP or REPEAT to adjust the remote
access code number by 10.
3. Press SETUP to save your selection and move
to the next menu option.
-OR-
Press
PLAY/
and exit the menu.
50
REPEAT to choose among off,
STOP to save your selection
REPEAT to adjust the remote
STOP to save your selection