3. Distance to combustible material regularly. It is the responsibility of the client that these regulations are complied with in the country/region 4. Assembly where the fireplace is installed. Nordpeis AS is not Connection of the flue responsible for incorrect installation. Operational control...
This can in a worst case scenario cause a fire. the country where the product is installed. Nordpeis AS is not responsible for wrongly assembled inserts. 3. Distance to combustible material Subject to errors and changes.
FIG 6 some smoke or smell. This smoke and smell will The amount of air to the combustion is regulated with disappear and are not hazardous. When lighting the fire the air vent control. for the first time we also recommend opening/shutting the door regularly the first two hours to aviod the door FIG 7 gasket sticking to the varnish...
For detailed description of the warranty conditions see the enclosed warranty card or visit our website A. Smoke baffle plate www.nordpeis.com B. Back plate C. Front bottom plate The CE mark is placed on the side of the insert.
Page 6
combustion chamber are properly burnt. Open the air vent and have the door slightly ajar in order for the flames to establish properly on the wood. Note that the air supply for the combustion also can be too large and cause an uncontrollable fire that very quickly heats up the whole combustion chamber to an extremely high temperature (when using with a closed or nearly closed door).
Some advice in case of combustion problems Error Explanation Solution The chimney is blocked. Contact a chimney sweeper / dealer for more information or clean The flue is sooty or there is accumulated soot on the the flue, smoke baffle and burn chamber. No draught smoke baffle.
Need help?
Do you have a question about the S-31A and is the answer not in the manual?
Questions and answers