Intercom - AT&T SL82208 User Manual

Telephone operation

Intercom

Use the intercom feature for conversation between
handsets.
Model SL82208
1. Press INT. The screen will show CALLING OTHER
HANDSET. The destination handset will ring,
and its screen will show OTHER HANDSET IS
CALLING.
2. On the ringing destination handset, press
PHONE
/FLASH
key (0-9, * or #) to answer the intercom call.
Models SL82308/SL82408
1. Press INT. The screen of the originating handset
will show INTERCOM TO:.
2. Enter the handset number of the destination hand-
set. The display will show CALLING HANDSET X.
The destination handset will ring, and its screen
will show HANDSET X IS CALLING.
3. On the ringing destination handset, press
PHONE
/FLASH
key (0-9, * or #) to answer the intercom call.
NOTES:
1. Before the intercom call is answered, you can cancel the
intercom call by pressing
originating handset.
2. If the destination handset is not answered within 100 seconds
or if it is in the directory or call log mode, or out of range, the
originating handset will show the message UNABLE TO CALL
TRY AGAIN.
3. Pressing OFF/
the intercom ringer.
To end the intercom call:
• Press OFF
/CLEAR
-OR-
• Place either handset in the charger or telephone
base.
14
, INT, SPEAKER, or any dial pad
, INT, SPEAKER, or any dial pad
OFF/CLEAR or INT on the
or MUTE/
CLEAR DELETE
or INT on either handset.
will temporarily silence