Installation; What To Do If - Electrolux EEB4233 User Manual

Hide thumbs Also See for EEB4233:
Table of Contents

Advertisement

48
www.electrolux.com

11.1 What to do if...

Problem
The oven does not heat up. The oven is deactivated.
The oven does not heat up. The clock is not set.
The oven does not heat up. The necessary settings are
The oven does not heat up. The fuse is released.
The lamp does not operate. The lamp is defective.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "12.00". There was a power cut.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

WARNING!
Refer to Safety chapters.
Possible cause
not set.
You left the dish in the oven
for too long.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
Remedy
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Replace the lamp.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
Reset the clock.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eob3430

Table of Contents