Rear View - IBM eServer 135 xSeries User Reference Manual

Rear view

Ethernet 1 speed indicator: This green LED lkights when the speed of the Ethernet
LAN that is connected to the Ethernet port 1 is 100Mbps.
Ethernet 1 link indicator: This green LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 1.
Select light: This green LED lights when the monitor, keyboard, and mouse are
logically connected to this server. This light duplicates the Select button LED on the
front of the server.
Console Out port: This port is used to connect the server to a keyboard, monitor, and
pointing device. It is also used to connect multiple servers together to share a single
keyboard, monitor, and pointing device.
Serial port: Signal cables for modems or other serial devices connect here to the 9-pin
serial port connector.
Console In port: This port is used to connect multiple servers together to share a
single keyboard, monitor, and pointing device.
Note:
USB port 1 and USB port 2: Signal cables for Universal Serial Bus (USB) 2 devices are
connected to the USB connector.
Note:
Ethernet 2 link indicator: This green LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 2.
Ethernet 2 speed indicator: This green LED lights when the speed of the Ethernet
LAN that is connected to the Ethernet port 2 is 100Mbps.
6
IBM xSeries 135: User's Reference
Ethernet 1 speed
indicator (green)
Ethernet 1 link
indicator (green)
Ethernet 2 link
indicator (green)
Ethernet 2 speed
indicator (green)
Connecting multiple servers together to share input/output devices is not
supported.
The addition of USB devices is not supported.
Console Out port
Select light (green)
USB 2
USB 1
Power-on light
(green)
System error
light (amber)
Serial port
Console In port