Diagnostic Error Message Tables - IBM eServer 135 xSeries User Reference Manual

Diagnostic error message tables

Table 14. Diagnostic error messages
Code Function
001 Core system
005 Video port
011 Serial port
014 Parallel port
015 USB interface
020 PCI interface
030 SCSI interface
075 Power supply
82
IBM xSeries 135: User's Reference
The following tables provide descriptions of the error messages that might appear
when you run the diagnostic programs.
Important
If diagnostic error messages appear that are not listed in the following tables,
make sure that your server has the latest levels of BIOS and diagnostics
microcode installed.
Result
Failed Processor board, ECC Test
System board
Processor and system boards
Integrated serial port
Integrated parallel port
Aborted Can NOT test USB interface while it is in use.
Note: If you have a USB keyboard or mouse
attached, you cannot run the diagnostic
program for the USB interface.
Failed System board
Failed System board
Failed SCSI adapter in slot n failed register/counter/ power
test
(where n is the slot number of the failing adapter)
SCSI controller on system board failed
register/counter/power test
Failed Voltage sensed by the system is out of range
Text message Action
Call for service.
1. Turn off the server.
2. Replace the USB
keyboard and
mouse with a
standard keyboard
and mouse.
3. Turn on the server.
4. Run the diagnostic
test again.
Call for service.
Call for service.
Refer to the information
provided with the
adapter for instructions.
If the problem persists,
call for service.
Call for service.
Call for service.