The Team at Drive Medical develops its products to give our customers the freedom to live independently. This encompasses their daily home life and provides them with the opportunity to enjoy an outing with family and friends. Our goal is to develop a range that will provide individuals with a chance to enjoy every day life.
7.2 Service Record --*---- brake and all connections, ensure the freewheel lever is in DRIVE 7.3 Battery Pack and Tyres 4th LED Flash AMBER Out of neutral at power up. Return wigwag...
As designs change some of the illustrations and Do not drive the scooter under the influence of pictures in the manual may not correspond to the drink or drugs, or when you are tired. Driving under scooters that you purchased.
Page 4
The Viper scooter can only be used by one person at a time. Do not carry passengers on your scooter (including children) Maximum user mass (weight capacity) The maximum weight that can be carried is 160kg / 25 stone (including occupant and any goods).
If the battery gauge flashes but the scooter will still reduced by pressing the Tortoise button. The top drive, then this indicates low battery power and the speed is displayed on the control panel. The more batteries should be recharged immediately. If it is segments of the display that are lit, the faster the not driving the check flash codes on page 1.
Page 7
Return the seat to the forward position operate as normal. before driving. The circuit breaker is located on the left hand side of the rear of the frame, behind the back bumper. Owner’s Handbook (Code: Viper_IFU) Viper Electric Scooter Page 7 of 16...
Page 8
The scooter can now be pushed / moved manually. Warning The lever should only be set to FREEWHEEL when on flat ground and unoccupied by the user. Otherwise, there is a risk of damage or injury. Owner’s Handbook (Code: Viper_IFU) Viper Electric Scooter Page 8 of 16...
Check the electromagnetic brake works correctly. may cause danger to Ensure it is safe around you before you drive on yourself and others, and the street or road. Engage the low speed setting if may cause damage to your you are driving on the pavement or indoors.
2. After charging or replacing a new battery, Trickle charging optimises the batteries and is drive the scooter for a short period to ensure necessary to maintain or improve battery battery capacity is sufficient.
Page 11
Remove the batteries following the procedure above. 2. Clean the battery with a clean cloth. If the terminal is covered by white powder, wipe it clean using warm water. Owner’s Handbook (Code: Viper_IFU) Viper Electric Scooter Page 11 of 16...
Check the following items weekly or before driving. If smoothly. If inspection determines excessive wear on you find anything abnormal contact your Drive Medical the brushes, they must be replaced or motor damage Dealer for further inspection or advice.
The tyre pressure should be periodically checked. 7.4 Cleaning The scooter should be cleaned periodically, especially if you tend to drive on sand, gravel or in other adverse environments. Use a soft, wrung dry cloth to keep your scooter clean and dust free.
9cm (3.5”) Max. load weight 160kg / 25 stone (including goods) Remark: Drive Medical reserves the right to modify the specification if necessary. The final specification is subject to the individual scooter you purchase from your dealer. Note: The maximum driving distance is based on an ambient temperature of 20ºC, a 100kg driver, a fully charged...
Please note your local service agent’s contact details Any work or replacement part installation must be in the previous box. In the event of your scooter carried out by an authorized Drive Medical dealer requiring attention, contact them and give all relevant / service agent.
Page 16
Reverse Tyres Wear Emergency stop Pressure Left turn Bearings Right turn Wheel nuts Slope test Motors Over obstacles Wiring List Items repaired Noise Connections Brake Brushes Chassis Condition Steering Owner’s Handbook (Code: Viper_IFU) Viper Electric Scooter Page 16 of 16...
Need help?
Do you have a question about the Viper and is the answer not in the manual?
Questions and answers