Do you have a question about the Bobcat X3 and is the answer not in the manual?
Questions and answers
C. Richard Schott
March 11, 2025
red light flashing 3 followed by 2, then repeats
1 comments:
Mr. Anderson
March 11, 2025
A red light flashing 3 times followed by 2 times on a Drive Bobcat X3 indicates two separate flash codes:
- Flash Code 3: Motor Wiring Trip – Check motor connections. - Flash Code 2: Motor Disconnect – Disconnect and reconnect the front and rear section.
After performing the recommended actions, turn the scooter off and back on to clear the codes. If the problem persists, another issue may be present.
This answer is automatically generated
Judy
July 7, 2025
Where does charging cord plug into to batteries to charge just batteries in house, silver and with 3prongs inside silver plug in thing?
Richard Lawrence
June 13, 2025
I have a BobCat X3 scooter. We used it for 2 days, charging it overnight. The last day we charged it overnight. All the lights were solid except for the red one, it kept blinking and the scooter would not move.
Need help?
Do you have a question about the Bobcat X3 and is the answer not in the manual?
Questions and answers
red light flashing 3 followed by 2, then repeats
A red light flashing 3 times followed by 2 times on a Drive Bobcat X3 indicates two separate flash codes:
- Flash Code 3: Motor Wiring Trip – Check motor connections.
- Flash Code 2: Motor Disconnect – Disconnect and reconnect the front and rear section.
After performing the recommended actions, turn the scooter off and back on to clear the codes. If the problem persists, another issue may be present.
This answer is automatically generated
Where does charging cord plug into to batteries to charge just batteries in house, silver and with 3prongs inside silver plug in thing?
I have a BobCat X3 scooter. We used it for 2 days, charging it overnight. The last day we charged it overnight. All the lights were solid except for the red one, it kept blinking and the scooter would not move.