Reboot; Status - Planet FRT-405N User Manual

Write Community:
Trap Configuration
Object
Mode :
Trap Community:
Trap Destination :
Click Apply to enable the configuration to take effect. Click Reset button to reset the whole configuration to
default.

5.8.5 Reboot

The Reboot screen allows you to restart your router with its current settings. Click the "Reboot" button and the
device will restart.

5.8.6 Status

Choose Administration > Status and the following page appears. It displays the information about Router
status, including system information, Internet configurations, and local network.
The default is Public.
Indicates the community write access string to permit reading and
re-writing this router's SNMP information.
The default is Private.
Description
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.

 Disabled: Disable SNMP trap mode operation.
Enter the community string for the trap station.
Enter the IP address of the trap manager.
74
User Manual of FRT-405N