Ht Physical Mode - Planet FRT-405N User Manual

Multiple SSID 1/2/3/4
Broadcast Network
Name (SSID)
AP Isolation
MBSSID AP Isolation
BSSID
Frequency (Channel)

HT Physical Mode

is NOT the same as planet.
There are 4 multiple SSIDs. Enter their descriptive names that you
want to use.
Select Enable to allow the SSID broadcast on the network, so that the
STA can find it. Otherwise, the STA cannot find it.
Enable or disable AP Isolation. When many clients connect to the
same access point, they can access each other.
If you want to disable the access between clients which connect the
same access point, you can enable this function.
Enable or disable MBSSID AP Isolation.
Basic Service Set Identifier. This is the assigned MAC address of the
station in the access point.
This unique identifier is in Hex format and can only be edited when
Multi BSSID is enabled in the previous screen.
A channel is the radio frequency used by wireless device. Channels
available depend on your geographical area. You may have a choice
of channels (for your region) and you should use a different channel
from an adjacent AP to reduce the interference. The Interference and
degrading performance occurs when radio signals from different APs
overlap.
43
User Manual of FRT-405N