Lan - Planet FRT-405N User Manual

5.2.2 LAN

This page allows you to enable or disable networking functions and configure their parameters according to
your practice.
The page includes the following fields:
Object
MAC Address
IP Address
Subnet Mask
MAC Address
DHCP Type
Start IP Address
Description
The physical address of the Router, as seen from the LAN. The value
can't be changed.
Enter the IP address of your Router or reset it in dotted-decimal
notation (factory default: 192.168.1.1).
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
MAC address of LAN port (Read-only).
 Disable: Disable DHCP server on LAN side.
 Server: Enable DHCP server on LAN side.
Fill in the start IP address to allocate a range of IP addresses; client
38
User Manual of FRT-405N