Subaru Forester 2016 Owner's Manual page 49

Hide thumbs Also See for Forester 2016:
Table of Contents

Advertisement

Rear center seatbelt is stowed in the
recess of the ceiling above the cargo area.
1. Retrieve the connector (tongue) plate
from the slot in the recess by pulling the
connector (tongue) plate, then pull out the
seatbelt slowly.
2. Pass the seatbelt through the belt
guide.
3. After confirming that the webbing is not
twisted, insert the connector (tongue)
attached at the webbing end into the
buckle on the right-hand side until a click
is heard.
If the belt stops before reaching the
buckle, return the belt slightly and pull it
out more slowly. If the belt still cannot be
unlocked, let the belt retract slightly after
giving it a strong pull, then pull it out slowly
again.
Seat, seatbelt and SRS airbags/Seatbelts
4. Insert the center seatbelt tongue plate
into the center seatbelt buckle marked
CENTER on the left-hand side until it
clicks.
5. To make the lap part tight, pull up on
the shoulder belt.
1-19
CONTINUED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents