Subaru Forester 2016 Owner's Manual page 219

3. The current setting will be displayed.
Pull the /SET switch toward you to
enter the selection mode.
4. Select the preferred setting by operat-
ing the or switch. Then pull the
/SET switch toward you.
5. Select Set by operating the
switch, and confirm the setting by pulling
the /SET switch toward you.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Instruments and controls/Multi function display
Keyless access setting (models
with keyless access with push-
button start system )
Preparation for keyless access
settings
1. Perform the preparation steps accord-
ing to Preparation for car settings
3-77
3-72.
CONTINUED