Subaru Forester 2016 Owner's Manual page 115

following conditions.
When the vehicle is not going to
be used for an extended period of
time
When the keyless access func-
tions are not going to be used
Disabling functions
By operating the access key
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key. For details about registering a PIN
code, refer to Registering a PIN code
2-19.
1. Open the driver s door.
2. Rotate the lock lever forward.
Keys and doors/Keyless access with push button start system
3. Press and hold the
button on the access key simulta-
neously for more than 5 seconds.
By operating the driver s door
A chirp sound will be heard, and the
function will be disabled.
1. Sit in the driver s seat, and close the
door.
button and 2. Push the rear side (unlock side) of the
power door locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver s door.
4. Within 5 seconds after step 3 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver s
door twice.
6. Within 10 seconds after step 5 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver s
door once.
2-17
CONTINUED