Subaru Forester 2016 Owner's Manual page 197

7. Select characters by operating the
or switch. Then pull the
SET switch toward you.
You can select characters of the
English alphabet (upper case charac-
ters and lower case characters are
available), eleven symbols or blank
spaces.
The word being edited will be
displayed with an underline.
8. After entering the name by repeating
/ step 7, select Set by operating the
switch and confirm the setting by pulling
the /SET switch toward you.
9. The system will notify you that the
setting is complete.
Instruments and controls/Multi function display
If an anniversary is approaching, the
following screen will be displayed accom-
panied by a beep when the ignition switch
has been turned to the ON position. This
function can be set to on or off. For details,
refer to Bypass screen setting
From 1 to 7 days prior to the anniversary
3-55
3-65.
CONTINUED