Subaru Forester 2016 Owner's Manual page 222

3-80
Instruments and controls/Multi function display
5. Select Set by operating the
switch, and confirm the setting by pulling
the /SET switch toward you.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Welcome lighting setting
The leaving time and approaching time
settings can be adjusted.
Leaving time setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the
select the Welcome Lighting item, and
then pull the /SET switch toward you.
3-72.
3. Select the Leaving time set
operating the or
pull the /SET switch toward you.
or switch to
by
switch, and then