Deck Assembly - Trackmaster TMX58 Owner's Manual

Parts List with Part Numbers
SEE NOTE 3
SEE NOTE 1
9-12

Deck Assembly

STRETCH ADJUSTMENT MARKS 4X
NOTES:
1.
2.
3.
TMX58 Owner's Manual
TRACKMASTER TRACKMASTER
ADJUSTMENT SCREWS MUST BE MATCH ADJUSTMENT SCREWS MUST BE MATCH
TIGHTENED. PROPER TENSION IS ACHIEVED TIGHTENED. PROPER TENSION IS ACHIEVED
WHEN BELT CAN'T SLIP ON PULLEYS WHEN IN WHEN BELT CAN'T SLIP ON
OPERATION.
ADJUST DRIVE BELT TENS SION PULLING ALL FREE
PLAY OUT OF BELT. DO NOT OVER TIGHTEN PLAY OUT OF BELT. DO NOT
CAUSING THE BELT TO STRETCH. CAUSING THE BELT TO STRETCH.
MOVE REAR PULLEY SIDE TO SIDE IN CHANNELS MOVE REAR PULLEY SIDE TO SIDE IN CHANNELS
TO OBTAIN FRONT TO REAR BELT ALIGNMENT TO OBTAIN FRONT TO REAR BELT ALIGNMENT
AND TRACKING.
SEE NOTE 2
INSTALL CAMBER
UP
July 2014