Workout Graphs - Trackmaster TMX58 Owner's Manual

TRACKMASTER
Quick Speed: The (5) quick speed buttons will rapidly bring the running belt speed to the speed
selected from 1 to 5 mph or K.P.H.
Incline Minus: The triangular incline minus button decreases the incline of the walking surface by .5
percent each time it is pressed while the running belt is operating. Pressing and holding the incline
minus button while the running belt is in motion will increase the rate of the command. However, it
may take a few seconds to reach the desired incline that is displayed on the information screen after
the button is released.
Incline Plus: The triangular incline plus button increases the incline of the walking surface by .5
percent each time it is pressed while the running belt is operating. Pressing and holding the incline
plus button while the running belt is in motion will increase the rate of the command. However, it
may take a few seconds to reach the desired incline that is displayed on the information screen after
the button is released.
Quick Incline: The (5) quick incline buttons will rapidly bring the running belt surface to the
selected incline from 3% to 15%.
WORKOUT GRAPHICS
1. The entire workout is represented in the form of a colored bar graph which depicts increasing
workout intensity as well as workout progression and current treadmill settings. These values
can be displayed in either Metric or English measurements.
2. Segments that have been completed will turn to MAGENTA. In the example above, the first two
segments of the workout have been completed leaving (7) segments yet to complete.
3. The GREEN portion of the bar represents an incline between 0 and 10%
4. The YELLOW portion of the bar represents an incline between 10% and 18%.
5. The RED portion of the bar represents an incline from 18% to 25%.
6. The BLACK horizontal bars represent the running belt speed. They will turn to WHITE when
the segment is completed.
August 2013 TMX428 Owner's Manual
Operating Instructions
6-3