Panasonic KX-TGP500 User Manual page 43

L Do not use more than 2 repeaters at a time.
L Cascade connections are not available.
Setting the repeater mode
The default setting is "Off".
Y Handset
1
{MENU} (centre of joystick)
2
{V}/{^}: "IP Service" i {SELECT}
3
{V}/{^}: "Call Features" i {SELECT}
4
{V}/{^}: "Repeater Mode" i {SELECT}
5
{V}/{^}: Select "On" or "Off". i {SAVE}
i {OFF}
Note:
L After turning the repeater mode on or off, _ is
displayed on the handset momentarily. This is
normal and the handset can be used once w is
displayed.
Registering the DECT repeater to the base unit
Note:
L Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the DECT
repeater.
1
Base unit:
■ KX-TGP500:
Press and hold {ALL} for about 4 seconds
until the STATUS indicator flashes in red.
■ KX-TGP550:
Press and hold {ALL} for about 4 seconds
until the registration tone sounds and the
STATUS indicator flashes in red.
L If all registered handsets start ringing, press
the same button to stop. Then repeat this
step.
L The next step must be completed within 90
seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until the &
indicator and w indicator light green.
3
Base unit:
To exit the registration mode, press {ALL}.
Document Version 2012-08
Registering a Unit
43