Rear panels: 200V/230V models
Figure 7. 5594-1KX
Figure 8. 5594-2KX
Figure 9. 5594-3KX
Figure 10. 5594-2BX, 5594-3BX
Control panel
The UPS has a five-button graphical LCD. It provides useful information about the
UPS itself, load status, events, measurements and settings.
USB communication port
RS232 communication port
Connector for automatic recognition
of battery packs
Slot where UPS Network
Management Card is installed
Connector for Remote On/Off
(ROO) control or Remote Power Off
(RPO) control
Connector for battery packs
16A outlet for connection of
equipment (Primary outlet group)
Two groups of two programmable
outlets for connection of equipment
(Outlet Groups 1 and 2)
Groups of four outlets for
connection of equipment (primary outlet
group)
Socket for connection to AC power
source
Connectors for battery packs (to the
UPS or to the other battery packs)
Connectors for automatic recognition
of battery packs
Chapter 2. Presentation
9