Removing The Battery Pack; Mounting The New Battery Pack - Lenovo RT1.5kVA Installation And User Manual

2u rack or tower ups
Hide thumbs Also See for RT1.5kVA:
Table of Contents

Advertisement

Removing the battery pack

About this task

Mounting the new battery pack

Procedure
Carry out the instructions in "Removing the battery pack" in reverse order.
Note: To ensure safety and high performance, use only battery packs supplied by
Lenovo.
Important: Take care to firmly press together the two parts of the connector
during remounting.
34
Installation and User's Guide
Remove the middle panel.
Remove the left-hand side
of the front panel by pushing
the button and then by sliding
the part.
Disconnect the battery
pack by separating the two
connectors (never pull on the
wires).
Remove the metal
protection cover in front of the
battery pack (two screws).
Pull the plastic tab to
remove the battery pack and
replace it.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt3.0kvaRt2.2kva

Table of Contents