Table of Contents
Advertisement
Table 1. User settings (continued)
Submenu
In/Out settings
Load segments -
(continued)
Auto start delay
Load segments -
Auto shutdown delay
Overload prealarm
Available settings
Default settings
[No Delay] [1 s] [2
Outlet Group 1: [3 s]
s]...[65354 s]
Outlet Group 2: [6 s]
The unit is powered
on with the specified
delay relative to the
primary outlet group.
[Disabled] [0s] [1 s]
Outlet Group 1:
[2 s]...[65354 s]
[Disabled]
During a power
Outlet Group 2:
outage, authorizes
[Disabled]
UPS to turn off
power to equipment
connected to Group 1
and/or Group 2
outlets.
This feature allows
the shedding of
non-critical loads in
order to conserve
battery power for
critical loads
connected to the
Primary outlet group.
[5 %] [10 %] [15 %]
[105%]
[20 %] ... [100 %] [105
%]
Sets critical
percentage of load
where alarm
overload alarm
occurs.
Chapter 2. Presentation
15
Advertisement
Table of Contents
