Dell PowerConnect 2808 User Manual page 66

Figure 6-8. Optical Transceiver Diagnostics
The Optical Transceiver Diagnostics page contains the following fields:
• Port — The port to which the fiber cable is connected.
Temperature — The temperature (in Celsius) at which the cable is operating.
•
• Voltage — The voltage at which the cable is operating.
• Current — The current at which the cable is operating.
• Output Power — The rate at which the output power is transmitted.
• Input Power — The rate at which the input power is transmitted.
• Transmitter Fault — Indicates if a fault occurred during transmission.
• Loss of Signal — Indicates if a signal loss occurred in the cable.
Data Ready — The transceiver has achieved power up and data is ready.
•
Displaying Optical Transceiver Diagnostics Test Results Table
1 Open the Optical Transceiver Diagnostics page.
2 Click Show All.
• The test is run and the Virtual Cable Test Results Table opens. Clicking Show All opens the Optical
Transceiver Diagnostics Table.
The Optical Transceiver Diagnostics Table contains the following columns:
66
Dell PowerConnect 28xx Systems User Guide