Emergency Function & Auto-Restart Function - German pool SAC-109 User Manual

Emergency Function & Auto-Restart Function
Emergency Function
The emergency button in some models could be on the right side of the unit under the front panel.
If the remote control is lost, proceed as follows: Lift the unit's front panel to reach the emergency button of
the air conditioner.
1. If you press the button once (one beep), the air conditioner will work in forced cooling function.
2. To switch off the unit, you just need to press the button again (a single long beep). After 30 minutes in
forced function, the air conditioner will automatically start working in Feel mode. The Feel function is
described in the section on Operating Instructions.
Remark: The external static pressure of heat pumps is 0 Pa for all models.
Auto-Restart Function
The appliance is equipped with an auto-restart function. With this function, the air conditioner can keep the
selected settings after a blackout or a voltage drop.
To deactivate the Auto-Restart function, proceed as follows:
1. Switch the air conditioner off and unplug it.
2. Press the emergency button while re-plugging the appliance.
3. Press the emergency button and hold for more than 10 seconds until you hear four short beeps from the
unit. The Auto-Restart function is off.
Front panel
Emergency button
P.8