Interactive Intelligence Audiocodes Mediant 800 based Installation And Configuration Manual page 25

4. Click Next. The IR Remote Content Service Connection dialog opens.
5. In the Maximum Connections text box, enter a number that corresponds to the number of
simultaneous recording playback connections that can be made to Interaction Recorder Remote
Content Service. Valid values range from 0 (zero) to 16.
6. In the Remote Host Port text box, enter the port number on this server that Interaction
Recorder Remote Content Service will use for communications to Interaction Recorder,
Interaction Recorder Client, and Interaction Media Server.
Note: Ensure that the port number is not in use by any other service or application. This also
applies to the Interaction Center server and Interaction Media Server.
7. Click Next. The Please specify the IC Servers dialog opens.
8. In the Server Selection text box, enter the fully-qualified domain name of an Interaction
Center server that will communicate with Interaction Recorder Remote Content Service and
then click Add.
Note: If you have a fallback Interaction Center server, you should also enter it in the Server
Selection field. If you add an erroneous entry, highlight that entry and select the Remove
button.
Interaction Media Server Appliance Installation and Configuration Guide 27