Interaction Recovery Module (Medium And Large Interaction Media Servers Only); Add The Server To The Domain - Interactive Intelligence Audiocodes Mediant 800 based Installation And Configuration Manual

Interaction Recovery Module
(Medium and Large Interaction Media Servers only)
This Interaction Media Server appliance is equipped with a factory restore feature using an internal
USB flash drive ("Interaction Recovery Module"). This module does not appear under My
Computer but is visible in the Disk Management console as the ININ_RECOV volume.
Important: Do not attempt to mount or modify the contents of the Interaction Recovery Module.
Doing so may result in the inability to restore the system to its factory state in the future.
For instructions on how restore the appliance (operating system and/or any Interactive Intelligence
software) to its factory state using the Interaction Recovery Environment software stored on the
Interaction Recovery Module, see the Factory Image Restoration Procedures technical reference
included with the Interaction Media Server appliance.

Add the server to the domain

This section describes how to join the Interaction Media Server appliance to the domain.
1. Open the Start menu and select Computer. The Computer dialog opens.
2. Select System properties. The System dialog opens.
Interaction Media Server Appliance Installation and Configuration Guide 13