Apply The Interaction Sip Proxy License - Interactive Intelligence Audiocodes Mediant 800 based Installation And Configuration Manual

Set up the Interaction Media Server appliance

Apply the Interaction SIP Proxy license

Interaction SIP Proxy is pre-installed on the hard drive of the appliance and its service starts
automatically. However, Interaction SIP Proxy remains idle until it is activated with a license file
and configured to manage SIP traffic.
After you acquire an Interaction Center license that includes Interaction SIP Proxy, you must load
the license through the Interaction SIP Proxy interface.
1. Place the Interaction SIP Proxy license on a local or shared network location.
2. Open a web browser and navigate to the URL and port number of the Interaction SIP Proxy web
interface. The URL prompts you to supply a user name and password.
Note: See the following example for the format of specifying this URL. Your address will likely
be different. The default HTTP port is 8080 (HTTP for a non-secure connection) and the default
HTTPS port is 442 (HTTPS for a secure connection).
http://mediaserver1:8080/
3. Log on to the Interaction SIP Proxy configuration webpage with the IC administrative user ID
and password. The default User Name is admin and the default Password is 1234. Be sure to
change these default values as soon as possible.
Note: The exact appearance of the credentials dialog depends on which browser you use. For
example:
4. Click OK. The Status-About page opens, indicating that a license is required.
Interaction Media Server Appliance Installation and Configuration Guide
Apply the Interaction SIP Proxy license
22