Lincoln Electric DC-655 Operator's Manual page 23

C-2 C-2
ACCESSORIES
K1528-1 Dual Process Switch - (Cannot be used
with K1486-1 Air Filter Kit) The Dual-Process Switch
mounts easily to the front of the machine and is
designed to provide a selection between left and right
side output terminals. Each pair of output terminals
can be switched to either the DC-655, high or low
inductance terminals as desired. Wire feed unit cables
and air carbon arc cables can be connected to either
or both sides of the box and with proper connection
can provide polarity change with just a switch change.
Selecting one side only energizes those output studs
and opens the other side. Installation instructions are
included with the switch.)
K1611-1 Paralleling Kit - Provides interconnection of
two DC-655 machines in parallel for doubling the cur-
rent capacity of one machine. This "master" and
"slave" conection configuration allows the "master" to
control the balanced output of both machines.
Individual protection circuits of both machines function
normally. (Installation instructions are included with
the switch.)
DC-655