Table of Contents
Advertisement
Bottom cover
Description
Bottom cover
Before removing the bottom cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service door (see
Remove the bottom cover:
1.
Loosen the seven captive Torx screws (1) that secure the bottom cover to the computer.
2.
Lift the bottom cover off the computer (2).
Reverse this procedure to install the bottom cover.
Service door on page
28).
Spare part number
840959-001
Component replacement procedures
29
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
