Table of Contents
Advertisement
Diagnostics error messages
Symptoms
●
Computer has power
●
POST error message displays
(Windows logo has not yet
appeared)
Note
88
Chapter 7 Troubleshooting guide
Possible causes
Diagnostic error messages indicate a problem. There may be a problem with the instruction
being sent from the BIOS to a hardware component (e.g., keyboard failures), or
incompatible hardware. Can usually be resolved by installing updated firmware for the
component.
Troubleshooting steps
1.
See
7. Status lights, blinking light codes, troubleshooting lights, and POST error
messages on page 71
for corrective actions. An example of a POST error message is
shown below.
2.
If there is power, you may be able to access BIOS. Reset BIOS to its default condition.
(9. Soft reset (Default Settings) on page
3.
Restore hardware to its original condition (i.e., bootable solid-state drive instead of
hard drive).
4.
Reseat suspected components and verify connection.
5.
Test suspected components using HP PC Hardware Diagnostics (UEFI) tool.
An Error Message means the system has finished BIOS hardware validation and is ready to
launch the Startup Menu. To access the Startup Menu for further options, press the
while restarting the computer.
75)
Esc
key
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
