Pro-Form performance 1850 PETL14715.0 User Manual page 14

15. Insert the Upright Wire (81) and the handrail wire
(G) through the two indicated looped ties on the
console assembly (H).
See the inset drawing. Connect the Upright
Wire (81) and the handrail wire (G) to the
console wires. The connectors should slide
together easily and snap into place. If they
do not, turn one connector and try again. IF
YOU DO NOT CONNECT THE CONNECTORS
PROPERLY, THE CONSOLE MAY BECOME
DAMAGED WHEN YOU TURN ON THE
POWER.
Insert all excess wires into the console assembly
(H). Then, pull the two ties tight against the wires
and cut off the ends of the ties.
16. Insert the handrail wire (G) on the left side
through the two indicated looped ties on the con-
sole assembly (H) and connect the handrail wire
to the console wire.
Insert all excess wires into the console assembly
(H). Then, pull the two ties tight against the wires
and cut off the ends of the ties.
15
H
Ties
16
Console
Wire
14
Console
Wires
81
G
Console
Wires
81
H
Ties
G
G