General Information; Check Speaker And Parts; General Care Of Your Loudspeaker And Amplifier; Bass And Loudness Contour Controls - Induction Dynamics S1.8Twd Owner's Manual

General Information

Please read these instructions thoroughly before attempting to connect and operate the S1.8Twd.

Check Speaker and Parts

Unpack and carefully check each loudspeaker. If you suspect damage from transit, report
the problem immediately to your dealer and/or delivery service. If possible save the shipping
carton(s) for future use.
General Care of Your Loudspeaker
Whenever changing speaker wires, interconnect wires or power cords, always turn off all
equipment. There are no user serviceable parts inside.
Your speakers come in a high quality finish that is both attractive and durable. To clean,
use a soft, damp cloth. If your drivers become dusty, dust them with a paintbrush or a brush
vacuum attachment. Do not use a strong or abrasive cleaner.
The grille is covered in acoustic cloth. To keep your grille clear of debris, we recommend
you use a lint roller (like you would use on clothes).

Bass and Loudness Contour Controls

Do not use bass or loudness contour controls. Induction Dynamics' subwoofers produce
very low frequencies without these controls. Use of these controls will make the bass sound
"boomy", obscure higher frequencies, and possibly cause damage.
S1.8Twd Location
The S1.8Twd mounts on drywall, preferably over studs, and should be placed in accordance
with the type of system you are installing as discussed on page 7. The S1.8Twd was designed
in such a way that the tweeter will be at ear level when the audience is sitting. The tweeter
reproduces high-frequency audio, which our ears perceive as most directional, so we are
most attuned to their level and placement.
A pair of S1.8Twd speakers should be placed six feet or more apart. Experiment with the
distance between the two speakers to achieve an evenly spread sound stage. Speakers
should be at the same height (with the tweeter at ear level).
A certified installer will finalize the placement of your S1.8Twd speakers in accordance with
the Audyssey MultEQ XT software. For more information, refer to the SX7000d instruction
manual.
3